Category Archives: Misc-Life

Cool 3D printed airplane launcher

Posted on May 15, 2018 by robertwilkie

Nice cool 3D printed paper airplane launcher. http://www.instructables.com/id/Mavericks-Launcher/

Posted in Cheap, CNC/3D-printing, Misc-Life | Comments Off on Cool 3D printed airplane launcher

Cool motion sensor horn

Posted on May 14, 2018 by robertwilkie

Need a quick alarm system or animal determinate, this is a nice build that will help with that. http://www.instructables.com/id/Infrared-Motion-Sensor-Horn/

Posted in Arduino, Cheap, Misc-Life | Comments Off on Cool motion sensor horn

Could concrete planter build

Posted on May 11, 2018 by robertwilkie

The author puts a soda can for the insert for the concrete, which is a good idea since you don’t have to remove it when done.  Could make a good mothers day project. http://www.instructables.com/id/DIY-SODA-CAN-CONCRETE-PLANTER/  

Posted in Cheap, Misc-Life, My Projects, Teaching and Learning | Comments Off on Could concrete planter build

Cool robot arm build

Posted on May 11, 2018 by robertwilkie

The build is pretty neat, the author posted up STL for 3D printing the arm out, even thought it was laser cut.  Looks like you can convert it either way. https://www.thingiverse.com/thing:2899185

Posted in CNC/3D-printing, Misc-Life, robots | Comments Off on Cool robot arm build

Build a Wax CNC

Posted on May 10, 2018 by robertwilkie

Interesting build,  Note that this build is on wheels and moves around.  Basically it prints out wax so that when the cloth is put into dye, the wax keeps the dye off and presto, you have a pattern.  Took me … Continue reading →

Posted in Arduino, Cheap, CNC/3D-printing, Misc-Life | Comments Off on Build a Wax CNC

Here is a different way to do a POV with a fan

Posted on May 9, 2018 by robertwilkie

Instead of the fan being part of the POV, the author uses the fan as a turntable for the LED’s. Building a POV Display On A PC Fan original site https://www.shortn0tes.com/2018/04/ws2811-pov-display-on-pc-fan.html

Posted in Arduino, Cheap, Misc-Life | Comments Off on Here is a different way to do a POV with a fan

3D printed single hand steering wheel knob.

Posted on May 9, 2018 by robertwilkie

I have seen stuff like this on tractors and boats. Not on regular cars thought. http://www.instructables.com/id/3D-Printed-Steering-Wheel-Assist-Tool/

Posted in CNC/3D-printing, Misc-Life | Comments Off on 3D printed single hand steering wheel knob.

Make a seed spreader

Posted on May 8, 2018 by robertwilkie

OK this was just too much to resist, the author build a salt spreader with a cheap leaf blower and a motor to “spin” and separate out the salt.  It also works to spread grass seed.  The authors are using … Continue reading →

Posted in Arduino, Misc-Life | Comments Off on Make a seed spreader

Simple HEPA filter system for a 3D printer

Posted on May 4, 2018 by robertwilkie

Simple HEPA filter build for a 3D printer case.  Since plastic can have bad stuff in them, its a good idea to try and filter some of that out. http://www.instructables.com/id/Active-Air-Filter-HEPA-13-Filter-and-Active-Carbon/

Posted in CNC/3D-printing, Misc-Life, Tools | Comments Off on Simple HEPA filter system for a 3D printer

Another short write up on making knobs

Posted on May 3, 2018 by robertwilkie

Been seeing more write up’s lately on making custom wooden knobs.  I personally like the one done a while back that included a template to help crank them out. http://www.homemadetools.net/forum/male-female-threaded-knobs-20271?homelistings#post29079

Posted in Cheap, Misc-Life, woodworking | Comments Off on Another short write up on making knobs