Monthly Archives: July 2019

The lathe from scrapes

Posted on July 19, 2019 by robertwilkie

The author put that it only cost him $3 in stuff he didn’t get from scrapes to build this. Overall its a pretty simple build. Could be good for not just using dremel bits stationary, but also make pens from … Continue reading →

Posted in Cheap, Misc-Life, Tools, woodworking | Comments Off on The lathe from scrapes

Nice groove making jig

Posted on July 19, 2019 by robertwilkie

Its used to make grooves in the edges of a board. When I first saw this I wasn’t sure what it was, til the example in the beginning of the video then it made sense. http://www.homemadetools.net/forum/end-face-grooving-machine-homemade-router-jig-woodworking-73650?homelistings#post136504

Posted in Misc-Life, Tools, woodworking | Comments Off on Nice groove making jig

Another nice tumbler build

Posted on July 18, 2019 by robertwilkie

Nice build. Its all in the video so you have to watch it to see the build vs read. But author goes into a lot of details. Including some failures along the way. http://www.homemadetools.net/forum/rotary-tumbler-de-burring-polishing-metal-parts-73394?homelistings#post135341

Posted in Cheap, Tools | Comments Off on Another nice tumbler build

Portify your tools that need bases

Posted on July 17, 2019 by robertwilkie

I have done something a bit more fancier than this for portifying some of my tools. Overall nice build. https://www.instructables.com/id/Clampable-Tool-Bases/

Posted in Cheap, Tools | Comments Off on Portify your tools that need bases

Build a slingshot from scratch

Posted on July 16, 2019 by robertwilkie

Nice write up on building one. Only downside is the author has a full woodworking shop which makes life easier. https://www.instructables.com/id/Building-a-SLINGSHOT-From-Scratch-step-by-Step/

Posted in weapons, woodworking | Comments Off on Build a slingshot from scratch

Bench grinder to belt sander

Posted on July 16, 2019 by robertwilkie

I like this build, and the author has some improvements at the bottom. Only issues I see is keeping the belt in line so it doesn’t slip off, and I think it would work better upright than on its side. … Continue reading →

Posted in Uncategorized | Comments Off on Bench grinder to belt sander

Tool to use your Drillpress as a Tapping Fixture

Posted on July 15, 2019 by robertwilkie

OK I admit I have done this mostly by hand, but putting a handle on the chuck of the drillpress is a good idea to make a manual turner for tapping a hole. Just make sure you unplug the drillpress … Continue reading →

Posted in Cheap, Tools | Comments Off on Tool to use your Drillpress as a Tapping Fixture

Nice build for hold down clamps

Posted on July 10, 2019 by robertwilkie

The author built them by hand. Me…I could see converting this to a CNC. http://www.homemadetools.net/forum/hold-down-clamp-wooden-clamps-making-73579?homelistings#post136240

Posted in Tools, woodworking | Comments Off on Nice build for hold down clamps

Make your own bandsaw

Posted on July 9, 2019 by robertwilkie

Nice project but…I think I would buy one myself off craigslist. Seems like alot of work. http://www.homemadetools.net/forum/homemade-bandsaw-portable-toptable-drill-powered-bandsaw-73532?homelistings#post135980

Posted in Tools | Comments Off on Make your own bandsaw

Picture hanging tool

Posted on July 8, 2019 by robertwilkie

Why didn’t I think of this, you have a threaded rod on a stick that you can use to make the mark on the wall where to put the hanger for the picture frame. https://rick.sparber.org/PictureHangingTool.pdf

Posted in Tools | Comments Off on Picture hanging tool