Monthly Archives: April 2015

Simple bike repair stand on wheels

I like this build, uses black pipe and a pipe clamp.  So its pretty cheap to make.  Only think I haven’t a clue where the author found the round plywood at Home Depot (I have never seen it) and the … Continue reading

Posted in Cheap, Tinkering | Comments Off on Simple bike repair stand on wheels

Make a Kayak on the cheap

OK this is really funny.  I wonder if it actually works.  Looks like $30 in PVC pipe, say $20 for the tarp (you want a good one).  Another $10 for tape and rope, etc…Author says he did it for under … Continue reading

Posted in Cheap, Misc-Life | Comments Off on Make a Kayak on the cheap

Build your own hanging bike rack on the cheap

I like this build, simple, cheap, and usable.  I had to watch it 3 times to get the parts list: Roughly its: 1 6 foot iron pipe  $10 3-5 husky hang all straps $20 bunch of zip ties $5 3-5 … Continue reading

Posted in Cheap, Misc-Life | Comments Off on Build your own hanging bike rack on the cheap

The best cheap router is…

TP-Link TL-WDR3600 according to this article.  It looks like it supports DD-WRT, and has dual band support.  Runs around 55-60 bucks. http://www.engadget.com/2015/03/27/wirecutter-the-best-wifi-router-for-most-people/?ncid=rss_truncated

Posted in Cheap | Comments Off on The best cheap router is…

Build a jig to hold cylinders to drill holes in them

On the tops of course.  I like this jig since it can hold the rod still while you drill the hole.  Typcially I just put it in a vise and line it up, but if you have a long pole…this … Continue reading

Posted in Cheap, Tools | Comments Off on Build a jig to hold cylinders to drill holes in them

Cool RPi weather station

I like the RPi build for this weather station, only thing….I wonder if the solar cell in the project is enough to recharge the battery to keep the RPi running.  Guess time will tell. http://www.instructables.com/id/Raspberry-Pi-Solar-Weather-Station/

Posted in RaspberryPi | Comments Off on Cool RPi weather station

Nice PVC build to hold batteries

I like this design for PVC pipe to hold a bunch of batteries.  The author is a little light on sizes he ended up using.  Also I think I would use different bits for the ends. http://www.instructables.com/id/PVC-tube-battery-AA-battery-holder/

Posted in Cheap, Misc-Life | Comments Off on Nice PVC build to hold batteries

Need some programming classes, check out hackr.io

Stumbled on this by accident.  Looks like its got allot of good freebie classes. http://hackr.io/

Posted in Misc-Life, Software Development | Comments Off on Need some programming classes, check out hackr.io

Interesting build for bike power

I have to love this build.  The author basically takes a bike, puts it on a stand, takes the chain off and attaches another chain with a hub that has a flywheel on it to drive another mechanical system.  It … Continue reading

Posted in Cheap, Tools | Comments Off on Interesting build for bike power

Build a shaking cleaner for bike chains

Interesting build where the author basically uses a motor to “shake” a container with a bike chain and cleaner to clean it up.  My 2 cents, you could use this for other things to shake as well. http://hackaday.com/2015/04/15/diy-automatic-chain-cleaning-machine/

Posted in Cheap, Tools | Comments Off on Build a shaking cleaner for bike chains